Power Magic EZ
Easy plug and play installation via OBD port.
Low voltage cut-off, timer and Parking Mode switch.
Power Magic EZ powers your BlackVue from your vehicle’s OBD* (On-Board Diagnostic) port.
Power Magic EZ detects when your car’s ignition is off and maintains power to enable Parking Mode while monitoring your battery’s voltage.
When configured voltage level or timer is reached, Power Magic EZ cuts the power to prevent vehicle battery discharge, and resumes when ignition is on again.
(*) May not be supported by some electric vehicles.
Parking Mode Switch ON: Power Magic EZ supplies your BlackVue with power even if the ignition of the vehicle is turned off, until it reaches voltage cut-off or timeout value.
Parking Mode Switch OFF: Power Magic EZ supplies power to your dashcam only when vehicle ignition is on.
When vehicle’s ignition is off, Power Magic EZ checks your vehicle’s battery voltage periodically while powering your BlackVue.
If power drops below the set cut-off level, Power Magic EZ automatically cuts power to the dashcam, thus saving your vehicle’s battery life.
Power your BlackVue for a preset duration, from 6 hours to infinity.
The timer function is only active when the vehicle’s ignition is off and automatically stops if ignition is on.
* Regardless of the timer setting, the power is cut as soon as the voltage drops below the configured voltage cut-off value.
Rest easy, knowing that your car is being monitored while you are away.
BlackVue dashcams automatically switch to Parking Mode to monitor your parked vehicle, but only writes to the memory card when something happens (motion or impact detected), which has two benefits:
Newer BlackVue dashcam models include Time Lapse + Event Parking Mode. Check the link below to learn more about Parking Mode.